Grind All

Write a Review253-854-6117

OPEN NOW - Closes at 4:00pm

Grind-All Delivers in 5 Days!

Hours

Regular Hours

Mon - Fri:	8:00 am - 4:00 pm
Sat - Sun	Closed

Services/Products

Centerless Grinding Centerless Grinding is an OD grinding process where the part is not physically held at its centers, achieving a round surface tolerance with surface finish and dimensional tolerances that are impossible to achieve with machining alone. Capabilities: Parts - .060” diameter to 5.0” diameter Long Bar - 12’ bars to a maximum diameter of ¾” Cable - up to 40’ long at a .00005 tolerance Tolerance: .0005 /.0002 Finishes: to better than 4 micron finish Outer Dimension (OD) Grinding OD grinding is performed on external surfaces of an object between the centers. The centers are end units with a point that allow the object to be rotated. Capabilities: Up to 14” diameter x 60” center to center. Overall weight is a determining factor on the size of part we can accommodate Tolerance: .0005 /.0002 Finishes: to better than 4 micron finish Internal Dimension (ID) Grinding ID grinding occurs on the inside of an object. The grinding wheel is always smaller than the width of the object. Capabilities: Parts as long as 24-28” long. We can hold .0002 concentricity and a 4 micron finish with tight tolerance .0002. We can also provide face grinding with .0002 flatness. Tolerance: .0005 /.0002 Finishes: to better than 4 micron finish Precision Honing Honing produces a precision surface on a work piece. The process is primarily used to improve the geometric form of a surface, but may also improve surface texture. High-precision parts are usually ground and then honed. Grinding determines the size, and honing improves the shape Capabilities: All types of materials From .175” to 3” Bores Holding .0002 tolerance with 4 micron finish Max Length 15” long Surface Grinding Surface grinding is used to provide precision ground surface, either to a critical size or for the surface finish Capabilities Up to 12” x 24” on magnetic chuck. Larger parts must be blocked and evaluated on a case by case basis Tolerance: within .0002 Finishes: to better than 4 micron finish Flatness: within .001 per foot Cylindrical Grinding The cylindrical grinder is a type of grinding machine used to shape the outside of an object. The cylindrical grinder can work on a variety of shapes however, the object must have a central axis of rotation. This includes but is not limited to such shapes as a cylinder, an ellipse, a cam, or a crankshaft. Capabilities: 14” x 60” center to center. We can grind angles, radius, grooves or length while holding .0002 tolerance. Tolerance: .0005 /.0002 Finishes: to better than 4 micron finish Tolerance: .0005 /.0002 Finishes: to better than 4 micron finish

Location

Behind Office Depot, just off SR167

AKA

Grind-All (Precision Grinding)

Grind-All Inc

Other Links

http://www.grind-all.com

http://www.grindallpro.com

Categories

Precision Grinding, Machine Shops, Metal Finishers

Other Information

Parking: Lot

Wheelchair Accessible: Yes